Description

Power Electronics has evolved from static converter technology into a significant field within electrical engineering and electronics. By using power semiconductors power electronics performs such functions as switching, controlling and converting of electrical energy with the greatest possible efficiency. One area of application for power electronics is drive technology. Here, speed variable DC and three-phase four-quadrant drives can easily be realized using modern power electronics. As a result of this development we can no longer imagine industry, workshop tools, commercial enterprises and household appliances without thyristor speed control units, smooth-starting circuits, frequency converters etc. The EDULAB DIDACTIC training panel system EM-21600Q for power electronics and drive now makes it possible to convey the technical knowledge of this field.

 

The experiments permit practice-oriented, hands-on training to be carried out, thus assuring the trainees of the proficiency needed to handle the tasks and the equipment found in this field. The training panels and functional units with block circuit diagrams and signal diagrams permit clear and understandable assembly of the experiment circuits. Beginning with the basic circuits, the student proceeds to tackle more complex circuits in power electronics and drive technology using a proven step-by-step method designed for didactic results. And of course, the model behind the entire system is the circuitry used in industrial applications.

 

Experiments cover the following topics:

Section 1: Diode and Uncontrolled Rectifier Circuit (AC-DC Conversion)

1-1 Power Diode

1-2 Single Phase Half Wave Rectifier Circuit

1-3 Full Wave Rectifier Circuit with Center Tap Transformer

1-4 Single Phase Full wave Bridge Rectifier Circuit

1-5 Three Phase Half Wave Rectifier Circuit

1-6 Three Phase Full Wave with Center Tap Transformer Rectifier Circuit

1-7 Three Phase Full Wave Bridge Rectifier Circuit

Section 2: SCR and Controlled Rectifier Circuit (AC-DC Conversion)

2-1 SCR and Single Phase Controller

2-2 Single Phase Half Wave Controlled Rectifier Circuit

2-3 Single Phase Full Wave Controlled Rectifier With Center Tap Transformer Circuit

2-4 Single Phase Bridge Full Wave Controlled Rectifier Circuit

2-5 Single Phase Full Wave Half Controlled Rectifier Circuit SCR based Inverters

2-6 Three Phase Half Wave Controlled Rectifier Circuit

2-7 Three Phase Full Wave Controlled Rectifier With Center Tap Transformer Circuit

2-8 Three Phase Bridge Full Wave Controlled Rectifier Circuit

2-9 Three Phase Full Wave Half Control Bridge Rectifier Circuit

2-10 Star-Delta Connections Control Rectifier Circuit

Section 3: Thyristors and Controlled Circuit (AC-AC Conversion)

3-1 Triac

3-2 Single Phase AC Voltage Control Circuit (On-Off Control)

3-3 Single Phase AC Voltage Control Circuit (Phase Control)

3-4 Three Phase Full Wave AC Voltage Control Circuit

Section 4: Chopper Circuit (DC-DC Conversion)

4-1 PWM Generation and Gate Drive Circuit

4-2 IGBT Chopper / Inverter Circuit

4-3 MOSFET Chopper Circuit

4-4 Darlington Chopper Circuit

4-5 Hi-Bridge Converter

 

EXPERIMENTS MODULE CONSISTS OF THE FOLLOWING:  

GROUP OF DIODE MODULE

EM-21-01-03

GROUP OF SCR MODULE

EM-21-01-05

EM-21-01-03

o   Device               : Fast Acting Silicon Diode

o   Quantity            : 6

o   Voltage              : 500V

o   Current              : 15A

o   Protection          : 5A Fuse With Fuse Holder

o   Terminal Socket : 4mm Safety Type

o   Unit Type           : Panel H2

 

EM-21-01-05

o   Device               : Silicon Control Rectifier

o   Quantity            : 6

o   Voltage              : 600V

o   Current              : 15A

o   Protection          : 5A Fuse With Fuse Holder

o   Terminal Socket : 4mm Safety Type

o   Unit Type           : Panel H2

 

TRIAC MODULE

EM-21-01-06

POWER MOSFET MODULE

EM-21-01-10

EM-21-01-06

o   Device               : TRAIC

o   Quantity            : 1

o   Voltage              : 600V

o   Current              : 15A

o   Protection          : 5A Fuse With Fuse Holder

o   Terminal Socket : 4mm Safety Type

o   Unit Type           : Panel H1

 

 

 

 

EM-21-01-10

o   Device               : Power Field Effect Transistor (N-Channel Enhancement Mode Silicon Gate)

o   DC Input Voltage : Maximum 220V

o   DC Output Current : Maximum 5A

o   Switching Frequency : 0…15KHz

o   Quantity            : 1

o   Voltage              : 600V

o   Current              : 15A

o   Protection          : 5A Fuse With Fuse Holder

o   Terminal Socket : 4mm Safety Type

o   Unit Type           : Panel H1

 

DARLINGTON TRANSISTOR MODULE

EM-21-01-12

IGBT CHOPPER / INVERTER MODULE

EM-21-01-13

EM-21-01-12

o   Device               : Darlington Transistor

o   DC Input Voltage : Maximum 220V

o   DC Output Current : Maximum 5A

o   Switching Frequency : 0…15KHz

o   Quantity            : 1

o   Voltage              : 600V

o   Current              : 15A

o   Protection          : 5A Fuse With Fuse Holder

o   Terminal Socket : 4mm Safety Type

o   Unit Type           : Panel H1

 

EM-21-01-13

o   Device               : Silicon Insulated Gate Bipolar Transistor (N-Channel Enhancement Mode Silicon)

o   DC Input Voltage : Maximum 220V

o   DC Output Current : Maximum 5A

o   Switching Frequency : 0…15KHz

o   Quantity            : 6

o   Voltage              : 600V

o   Current              : 15A

o   Protection          : 5A Fuse With Fuse Holder

o   Terminal Socket : 4mm Safety Type

o   Unit Type           : Panel H2

TWO PULSE CONTROLLER

EM-21-02-01

SIX PULSE CONTROLLER

EM-21-02-02

EM-21-02-01

o   Power Supply     : +15V/0V/-15V

o   Input / Output    : Transformer & Pulse Transformer

o   Synchronization Voltage : 5-220V,50/60Hz

o   Control Voltage   : 0-10V

o   Trigger Angle      : 0-30°

o   Trigger Control Delay Angle : 0-180° & 180°-360°

o   Pulse Output      : Single Pulse, Train Pulse

o   Protection          : 5A Fuse With Fuse Holder

o   Terminal Socket : 4mm Safety Type

o   Unit Type           : Panel H1

EM-21-02-02-P1

o   Power Supply : +15V/0V/-15V

o   Input / Output : Transformer & Pulse Transformer

o   Synchronization Voltage : 5-400V, 50/60Hz

o   Control Voltage : 0-10V

o   Trigger Angle : 0-30°

o   Trigger Control Delay Angle: 0-180° & 180°-360°

o   Pulse Output      : Single Pulse & Train Pulse

o   Protection          : 5A Fuse With Fuse Holder

o   Terminal Socket : 4mm Safety Type

o   Unit Type           : Panel H2

PWM CONTROLLER

EM-21-02-03

DUTY CYCLE PHASE CONTROLLER

EM-21-02-04

EM-21-02-02

o   Output: Pulse Width Modulation Isolated Pulse Output

o   Frequency Variable : 0…20kHz : x1, x10, x100 (Switchable)

o   Duty Ratio          : 0…100% (Reverse / Forward)

o   Protection          : 5A Fuse With Fuse Holder

o   Terminal Socket : 4mm Safety Type

o   Unit Type           : Panel H2

EM-21-02-04-P1

o   Power Supply : +15V/0V/-15V

o   Synchronization Voltage : 5-400V,50/60Hz

o   Output Phase Control : Positive and Negative

o   Duty Cycle (D) : 0.00, 0.25, 0.50, 0.75, 1.00

o   Protection: 5A Fuse With Fuse Holder

o   Terminal Socket: 4mm Safety Type

o   Unit Type : Panel H1

 

RESISTIVE LOAD MODULE (I)

EM-21-03-01

INDUCTIVE LOAD MODULE

EM-21-03-02

EM-21-03-01-1

o   Configuration : STAR , DELTA

o   Resistor    : 3X100Ohm / 100 Watt

o   Protection : 5A Fuse With Fuse Holder

o   Terminal Socket : 4mm Safety Type

o   Unit Type : Panel H1

EM-21-03-02

o   Configuration     : STAR , DELTA

o   Inductor            : 50mH/2.5A

o   Protection          : 5A Fuse With Fuse Holder

o   Terminal Socket : 4mm Safety Type

o   Unit Type           : Panel H1

CAPACITOR LOAD MODULE

EM-21-03-03

RESISTOR LOAD MODULE (II)

EM-21-03-04

EM-21-03-03

o   Configuration      : STAR , DELTA

o   Capacitor            : 0.1uF / 450V

o   Protection          : 5A Fuse With Fuse Holder

o   Terminal Socket : 4mm Safety Type

o   Unit Type           : Panel H1

EM-21-03-04

o   Configuration     : STAR , DELTA

o   Resistor             : 3×1.0 Ohm/5Watt

o   Protection          : 5A Fuse With Fuse Holder

o   Terminal Socket : 4mm Safety Type

o   Unit Type           : Panel H1

DC POWER SUPPLY MODULE

EM-21-04-02

CONNECTING SAFETY LEAD SET

EM-30-15-04

EM-21-04-02

o   Output   Type   : DC Fixed Output Voltage

o   Output Voltage : +15V/0/-15V

o   Output Current : 2A

o   Power Supply    : 240V,50Hz

o   Protection         : Short Circuit & 5A Fuse With Fuse Holder

o   Terminal Socket : 4mm Safety Type

o   Unit Type          : Panel H1

 

 

  EM-21-12-01-P1

o   The set consists of 2 type lead set and 2 type bridging plug set in 5 different coded colors and lengths chosen to allow the realization of all experiment manual.

o   Leads are capable of 15A current safety plugs.

o   Safety Terminal Socket (4mm): 25cm x 15 units; 50cm x 20 units; 100cm x 15 units

o   2mm Test Leads Set: 45cm x 12 units

o   19mm Bridging Plug Set x 10 units

o   19mm Bridging Plug Set (Stackable) x 10 units

THREE PHASE AC POWER SUPPLY

EM-21-04-01

EM-21-04-01  

o   Output Type : AC Fixed Output Voltage

o   AC Input Voltage : 3×240/415V+N+PE

o   Transformer Output : 3×0-45-90V

o   Output Current : 2.0A

o   Circuit Breaker, E.L.C.B, Power Switch, Emergency Switch, Pilot Lamp

o   Protection : Short Circuit & 5A Fuse With Fuse Holder

o   Terminal Socket : 4mm Safety Type

o   Unit Type : Panel H4

 

DIGITAL DC VOLTMETER

EM-30-13-01

DIGITAL DC AMMETER

EM-30-13-02

EM-30-13-02-P1

o   Modular design

o   Measurement range : 0 ~ 600Vdc

o   Display : 3 ½ digits 14.2 mm LED

o   Accuracy : ± 0.2% ± 1 digit

o   Resolution : 1V

o   Input impedance : 1MΩ

o   Power source : 220Vac, 50/60 Hz

o   Unit Type : Panel H1

o   Terminals: 4mm Safety Sockets (Color Coded)

EM-30-13-02-P1

o   Modular design

o   Measurement range : DC 0 ~ 10 A

o   Display : 3 ½ digits 14.2 mm LED

o   Accuracy : ± 0.3% ± 1 digit

o   Resolution : 0.01 A

o   Input impedance : < 0.1Ω

o   Power source : 220Vac, 50/60 Hz

o   Unit Type : Panel H1

o   Terminals: 4mm Safety Sockets (Color Coded)

DIGITAL AC VOLTMETER

EM-30-13-03

DIGITAL AC AMMETER

EM-30-13-04

EM-30-13-03-P1

o   Modular design

o   Measurement range : 0 ~ 600Vac

o   Display : 3 ½ digits 14.2 mm LED

o   Accuracy : ± 0.2% ± 1 digit

o   Resolution : 1V

o   Input impedance : 1MΩ

o   Power source : 220Vac, 50/60 Hz

o   Unit Type : Panel H1

o   Terminals: 4mm Safety Sockets (Color Coded)

 

EM-30-13-04-P1

o   Modular design

o   Measurement range : AC 0 ~ 5A

o   Display : 3 ½ digits 14.2 mm LED

o   Accuracy : ± 0.3% ± 1 digit

o   Resolution : 0.01 A

o   Input impedance : < 0.1Ω

o   Power source : 220Vac, 50/60 Hz

o   Unit Type : Panel H1

o   Terminals: 4mm Safety Sockets (Color Coded)

THREE PHASE POWER QUALITY METER

EM-30-13-16

EM-30-13-16-T1

o   Modular design

o   Display Type: HD LCD Display

o   Real-Time Measurement

·        Phase voltage: V1, V2, V3, Vlnavg Line voltage: V12, V23, V31, Vllavg Current: I1, I2, I3, Iavg, In Active power: per phase and total active power Reactive power: per phase and total reactive power Apparent power: per phase and total apparent power Power factor: per phase and total power factor Total frequency

o   Energy And Demand

·        Four quadrant active energy: Import, Export, Total, Net Four quadrant reactive energy: Import, Export, Total, Net Active, Reactive, Apparent demand

o   Power Quality Analysis

·        Voltage unbalance  Current unbalance  Voltage THD (Total harmonic distortion), Odd-even harmonic distortion Voltage individual harmonics, Crest factor Current THD, Odd-even harmonic distortion Current individual harmonics, K factor

o   Communication

·        Ethernet 10/100M network port

·        RS485 communication port

·        MODBUS RTU communication protocol

o   Trend Logging

·        Phase voltage Line voltage Current Active power Reactive power Apparent power Power factor  Frequency Three-phase unbalance Active energy Reactive energy Apparent energy Phase

o   Settable Logging Interval

·        Logging from 1min to 60min, interval settable

o   Software Accessibility

·        4 Tariffs (DataLog) Sharp, peak, flat, valley in different season and schedule (TOU)

o   PowerMeter Management Software Interface

o   Accuracy: ±0.5%

o   Protection: Fuse

o   Power Supply: AC240VAC, 50Hz

o   Terminals: 4mm Safety Socket

o   Unit Type : Panel H2

POWER MANAGEMENT SOFTWARE

EM-30-13-16-PMS

 
EM-30-13-16-PMS-T1

o   PC software for power quality meter

o   True-RMS measuring parameters

o   ANSI and IEC 0.2 accuracy class

 

 

o   Power quality analysis

o   4 quadrant energy

o   Data logging

o   Measure individual harmonics from 2nd to 49th

o   TOU, 4 Tariffs, 6 Seasons, 6 Schedules

 

 

 

EXPERIMENTAL TABLE

EM-30-16-01-02

EXPERIMENT PANEL FRAME

EM-30-16-02-02

EM-30-16-01-01-3D-P1

o   5′ Standard Desktop

o   Dimension:

o   Length : 1500mm

o   Width : 800mm

o   Height : 850mm

o   3 Layer Drawer (Optional)

 

 

EM-30-16-02-P1

o   Din Standard A4 With Two Shelves

o   Side Frame: T Shape

o   Dimension:

o   Length : 1450mm

o   Width : 20mm

o   Height : 300mm

 

 

 

Note: Layout and specification may change without prior notices for products continuous development and improvement process.