|
|
| |
|
|
| |
 Rugged micro zoom lens with 0.7x - 4.5x primary magnification, with detents.
0.35x Video Coupler
F.O.V.: (based on a 1/3" CCD) |
| |
| |
Hi-Mag:
H: 3.04 mm
V: 2.28 mm
Low-Mag:
H: 19.59 mm
V: 14.69 mm |
| |
| |
|
|
| |
|
1) 1/3" CCD Color camera with 480 TV Lines of resolution;
768 (H) x 494 (V) pixels. Manual gain and color controls allow for exceptional color reproduction. 12-pin Hirose connector with power and S-Video Out.
2) MegaPixels Digital Color Imaging Camera UCM1300 - True 24 Bits 1280 x 1024 Pixels Resolution.USB 2.0 Interface
3) Half-MegaPixels Digital Color Imaging Camera UCM480 - True 24 Bits 800 x 600 Pixels Resolution. USB 2.0 Interface |
| |
| |
|
|
| |
| Stand, Base with Focusing System & accessories option |
| |
| |
|
|
| |
|
Fluorescent Ring Lamps provide non-directional and shadow free illumination.
150 Watt fiber optic illuminator with intensity control and "Day-Light" filter, 36" Annular ring light guide. Provides you with shadow free and evenly distributed light. |
| |
| |
|
|
| |
| N.I.S.T. traceable calibration target. 11 concentric circles from 0.005" - 1.00". |
| |
| |
|
|
| |
|
Pentium Class Processor
SVGA monitor with 800 x 600 or better resolution
CD-ROM drive
32 MB RAM
Hard drive with minimum 20 MB free space
Windows 95/98, Windows 2000 or XP
Note : For Windows 2000 or XP Must use Digital Imaging Camera - USB 2.0 Interface.
PCI slot for video Interface card (For Windows 95 and 98)
|
| | |
| |
|
VZM-10-VIMM Video Inspection & Measurement System
|
| |
|
|
|
|
|
|
|
|
Improve your quality control without hurting your bottom line. Scienscope's Visual Inspection & Measurement Software ViS 2.10 Pro is an affordable, yet highly accurate measurement system. |
| |
| :: SOFTWARE |
 |
|
|
| The ViS2.1 Professional software is a PC-based dimensional measurement software that turns a conventional microscope into a powerful measurement station. The software uses the latest digital image processing technology to analyze video images for dimensional measurement. It then compares the measurement to nominal values and tolerances to identify conditions of non-conformance. The software can also be integrated to your application.
The software is for Windows 95, Windows 98 and Windows 2000 & XP. It takes advantage of the latest operating systems and provides you a familiar, graphical environment to complete your measurement. The software can be easily linked to other Windows applications, such as spreadsheets and SPC packages. The ViS2.10 Pro tolerance functions conform to ASME Y14.5M 1994.
The software is designed for image documentation, product inspection and quality control. The software provides a full range of functions for image capture, measurement, archival, image comparison, image and result output. The software is easy to use and it will deliver reliable and repeatable precision measurement results on the hardware of your choice. |
| |
| :: Video Interface Card (Required If Without Using Digital Imaging Camera) |
|
| |
| A video card is used to transfer the image to the PC monitor, where an accurate measurement can be achieved using the ViS2.0 Software. The Video Card incorporates an on-board 3D accelerator. Its 128-bit memory interface is capable of running at speeds up to 125 MHz, allowing for display resolutions up to 1600x1200 at 85 Hz. |
| |
| :: Lens & Couplers option |
|
| |
|
Various Auxiliary lenses and Video Couplers for different magnifications and FOV, look at table below for configuration
|
| |
