|
7101 SPECIFICATIONS |
|
MERIT |
- Power save measurement system - Power save function which open circuit at only the time of measurement. Can be minimized measuring error by increasing of temperature etc.
- Measuring speed changeover system - Fast = approx. 12msec; Slow = approx. 20.5msec
- Electronic button - Applied Electronic buttons for operation setting instead of Mechanical push in type. Few troubles.
|
|
SPECIFICATIONS |
|
Standard set value |
Current |
Display limit |
Accuracy |
|
SLOW |
FAST |
|
100mohm to 999mohm |
100mA |
99.9% |
within 0.3% 1digit |
within 0.3% 2digit |
|
1.00ohm to 9.99ohm |
100mA |
within 0.2% 1digit |
within 0.2% 2digit |
|
10.0ohm to 99.9ohm |
10mA |
|
100ohm to 999ohm |
5mA |
|
1.00kohm to 9.99kohm |
500microA |
|
10.0kohm to 99.9kohm |
50microA |
|
100kohm to 999kohm |
5microA |
|
1.00Mohm to 9.99Mohm |
0.05microA |
within 0.3% 1digit |
within 0.6% 2digit |
|
10.0Mohm to 100Mohm |
0.05microA |
within a 2digit |
- |
|
(mohm check) |
100mA |
0 to 999mohm |
within 0.2% 1digit |
within 0.2% 2digit |
a = (Mohm setting value /100) 3%
Remarks: In case of FAST mode, though can measure, we do not guarantee accuracy at STANDARD set value (10Mohm to 100Mohm) range. |
|
MEASURING TIME |
|
Frequency |
Remote start |
Free Running |
|
FAST |
SLOW |
FAST |
SLOW |
|
60Hz |
12msec |
20.5msec |
30times per sec |
30times per sec |
|
50Hz |
13.5msec |
24msec |
25times per sec |
25times per sec | |
|
Measurement Way |
4 terminals measurement - below 99.9ohm
2 terminals measurement - 100kohm over & Contact check on or off |
|
Judgement setting limit |
Both upper/ low limit - 0.00% to 9.99% (mohm check is 000 mohm to 999mohm) |
|
Input Signal |
START, HOLD |
|
Output Signal |
HI/ GO/ LO (judged result) |
|
Ambient Temperature |
0oC to o C |
|
Ambient Humldlty |
below 85% |
|
Outer Dimensions |
250(W) x 85(H) x 345(D) mm |
|
Power supply |
AC 100V / 117V/ 220V/ 24V 50Hz/ 60Hz approx. 30VA |
|
Weight |
4kg approx |
|
Option |
Contact Check Function / RS-232C / PRINTER output |
