Analog & Digital Lab Trainers ULT-3000

0.0/5 rating (0 votes)

Description

ULT-3K-SE-P2

OVERVIEW

The ULT-3000 contains all of the functions required for studying and experimenting with analog electronics, digital electronics, communication electronics etc. The ULT-3000 is a complete analog and digital training platform which is compact, lightweight and extremely durable.

EXPERIMENTS COVER

The ULT-3000 come with experiments manual (SOFTCOPY MANUAL ONLY NO COMPOENENTS) to cover the following experiments topics:

(A) Digital Electronics Experiments Lists Cover in the Lab Manual:

  1. Fundamental Logic Gate – AND, OR, NOT
  2. Fundamental Logic Gate – NAND, NOR, XOR
  3. Application Of Boolean Algebra
  4. De Morgan’s Law (I)
  5. De Morgan’s Law (II)
  6. Diode Resistor Logic – AND
  7. Exclusive OR Using Basic Logic Gate
  8. Exclusive NOR Using Basic Logic Gate
  9. Demultiplexer – Using The 74138 IC
  10. Synchronous Up – Counter
  11. Synchronous Down – Counter
  12. The Schmitt Trigger
  13. Oscillator – Using CMOS

(B) Analog Electronics Experiments Lists Cover In the Lab Manual :

  1. The Superposition Theorem
  2. Capacitors in Voltage – Divider Networks
  3. Operational Amplifier – The Inverting Amplifier
  4. Operational Amplifier – The Non Inverting Amplifier
  5. Operational Amplifier – The Comparator
  6. Operational Amplifier -  The Summing Amplifier
  7. The Common – Base Amplifier Structure
  8. The Common – Emitter Amplifier Structure
  9. The Common – Collector Amplifier Structure
  10. The Op Amp Differentiator
  11. The Op Amp Integrator
  12. The RC Phase Shift Oscillator
  13. The Schmitt Trigger
  14. The Astable Multivibrator
  15. The D/A Converter
  16. The A/D Converter

APPLICATIONS

  • Basic Electronics Training Courses
  • Advanced Electronics Circuit Design
  • Analog Circuit Experiments
  • Digital Circuit Experiments
  • Basic Logical Circuit Tracing
  • Computer Interfacing Circuits
  • Circuit Trouble Shooting

SPECIFICATION

1. DC Power Supplies Module

  • Fixed Output: +5V/1A, -5V/0.5A, +12V/0.5A, -12V/0.5A
  • Variable Output: +0V ~ +25V/1A, -0V to -25V/0.5A
  • All power supplies are short circuit protected.

2. AC Power Supplies Module

  • 19V–15V–9V–0V–9V–15V-19V

3. Function Generator (2 Channels) & Clock Generator (2 Channels)

  • Sine, Triangle and Square waveform output
  • Frequency range : 1Hz to 1MHz in 6 decades
  • With fine adjust, Amplitude and DC offset control
  • Clock output 1Hz to 1MHz in 6 decades
  • Six frequency ranges:
  • 1Hz to 10Hz
  • 10Hz to 100Hz
  • 100Hz to 1KHz
  • 1KHz to 10KHz
  • 10KHz to 100KHz
  • 100KHz to 1MHz
  • Sine wave output: 0 to 12V peak to peak variable
  • Triangle wave output: 0 to 8V peak to peak variable
  • Square wave output: 0 to 12V peak to peak variable

4. Solderless Breadboard Module

  • Interconnected with 2712 tie points nickel plated contact, fits all components with DIP sizes and solid wire AWG#22-30 (0.30.8mm).

5. TTL/CMOS Selection Switch

  • Select TTL (+5V) or CMOS (12V) Mode for data switches

6. 2-Single Shot Pulse Module

  • 2 units push-buttons debouncer switches
  • 80µS Positive & Negative Pulse

7. Two digits of 7-segment LED Display Module

  • Output numerical displays

ND-1

  • Segment Identification

SS-1

8. 16-bit LED Indicators with buffer Module

  • Sixteen LED's separate input terminals.
  • The LED lighted up when input at "HI level", and turned off when no input or at "LO level"

9. 16-bit HI/LO Data Output Switches Module

  • Sixteen slide switches’ separate input terminals.
  • When slide switch set at "down" position, the output is LO level; it will be HI level while setting at "up" position.

10. 3-State Logic Probe Module

  • HI, Float & LO Level LED Logic Indicator

11. Speaker Module

  • 8 Ohm, 0.25W With Buffer

12. Digital DC Volt Meter

  • 4 ½ Digits LED display
  • Four voltage ranges :
  • 0V to 199.9VDC
  • 0V to 19.99VDC
  • 0V to 1.999VDC
  • 0V to 199.9mVDC
  • Input Impedance: 10Mohm for any range

13. Adaptors Interface Module

  • 2mm & 4mm Adaptor Interface Socket to turn pins socket

The ULT-3000 is shipped with a comprehensive Experiments & Instruction manaul in CD Format a power cord.

Power Supply : 240VAC, 50Hz (Fused Protected)

Dimensions : (W x D x H) 310 x 260 x 90mm

Weight : 3.5 kgs

Share this product