Analog & Digital Lab Trainer ADT-7000

Analog & Digital Lab Trainer ADT-7000

0.0/5 rating (0 votes)


Catalog Download PDF


The ADT-7000 contains all of the functions required for studying and experimenting with analog electronics, digital electronics, telecommunication electronics etc. The ADT-7000 is a complete analog and digital training platform which is compact, lightweight and extremely durable.


o Basic Electronics Training Courses
o Advanced Electronics Circuit Design
o Analog Circuit Experiments
o Digital Circuit Experiments
o Telecommunication Circuit Experiments
o Basic Logical Circuit Tracing
o Computer Interfacing Circuits
o Circuit Trouble Shooting


1. DC Power Supplies Module
Fixed Output: +5V/1A, -5V/0.5A, +12V/0.5A, -12V/0.5A
Variable Output: +0V ~ +23V/0.5A, -0V ~ -23V/0.5A

2. AC Power Supplies Module

3. Function Generator Modules
Sine, Triangle and Square waveform output
Frequency range: 1Hz to 1MHz in 6 decades
With fine adjust, Amplitude and DC offset control
TTL Mode: 1Hz to 1MHz in 6 decades
Six frequency ranges:
1Hz to 10Hz
10Hz to 100Hz
100Hz to 1KHz
1KHz to 10KHz
10KHz to 100KHz
100KHz to 500KHz
Sine wave output: 0 to 12V peak to peak variable
Triangle wave output: 0 to 8V peak to peak variable
Square wave output: 0 to 22V peak to peak variable

4. Removable Solderless Breadboard Module
Interconnected nickel plated with a total of 2200 tie points nickel plated contact, fitted all DIP sizes and all components with lead and solid wire in diameter of AWG #22-30 (0.3-0.8mm)

5. Two Logic Output Switches Module
Provide two sets of logical output X  XBAR

6. Two Pulse Switches Module
Provide two sets of pulse output A  ABAR 2 units push button switch contain switches debouncer for eliminating the bounce caused by switch from "open" to "close" or from "close" to "open" position.

7. 16-Bits LED Indicators with buffer Module
Sixteen LED's separate input terminals in three colors. (RED, Yellow & Green). The LED will be lighted up when input is at "HI Level", and it will be turned off when it is at no input or at "LO Level". Capable for Traffic Light Experiments.

8. 16-Bits HI/LO Data Output Switches Module
16 units slide switches and corresponding output terminals. When switch is set at "down" position, the output is LO level; contrarily, it is to be HI level when setting at "up" position.

9. TTL/CMOS Selection Switch
Select TTL or CMOS Mode for data switches

10. Two digits 7-segment LED Display Module
Numerical designs and resultant display                                        Truth Table


11. Speaker Module
8Ohm, 0.25W With Audio Amplifier

12. Potentiometer Module
With 1K, 100K and 500K Ohm Potentiometers

13. Adaptors Module
2 Channels 4mm Banana and 2 Channels BNC Adaptor

The ADT-7000 is shipped with a comprehensive CD Format Experiments Manual, Instruction Manual with Self Maintenance Guide and a power cord.

Power Supply : 240VAC, 50Hz (Fused Protected)
Dimensions : (W x D x H) 380 x 280 x 90mm
Weight : 3.5 kgs

Share this product