1. The Pulse Signal Generator - Maximum Pulse Output Voltage can reach +5V(50Ω Load). Its Repeated Frequency Range is selected by the Internal Oscillator Frequency (1MHz-10MHz) and Crystal Oscillator Frequency (10MHz). (1Hz-10MHz to choose INT mode, 10Hz-10MHz to choose X-TAL Mode)

2. At X-TAL mode, using the knob, by the 7 pre-set frequency range, you can set a frequency accurately. At the INT mode, you can set a stochastic Repeated Frequency.

3. It can generate a Pulse Wave of high quality (1Hz-10MHz),thus it has a very wide application in all kinds of circuit test. In the analyzing and design of a digital circuit, it can be used as a Clock Pulse Source.

4.Single Oscillator Mode Input

       Method: press the switch

5.Pulse Output

       Output voltage: 0 ~ +5V adjustable (50Ω Load)

                             0 ~ +10V adjustable (open status)

       Rising time     : <10nS (50Ω Load，+2.5V -- +5V)

       Falling time    : <10nS (50Ω Load，+2.5V -- +5V)

       Period INT      : 100nS-1000mS/ 1-7 ranges (Freq. changes at each range)

       X-TAL           : 100nS-100mS /1-7 ranges   (Freq. fixed)

       Delay time      : 0-50mS/1-7 ranges               (Freq. changes at each range)

       Pulse width    : 50nS-50mS /1-7ranges         ( Freq.Changes at each range)

6.Trigger Output

       Output Method: C-MOS (74HCO2)(50Ω Load, ≥1V)

       Pulse width     : about 20nS

7.OSC output

       Output Method: C-MOS (74CO4)( 50Ω Load, ≥1V)

8.Frequency counter

       Display               : 4 digits, high brightness LED display

       Range                : 10Hz-20MHz

       Accuracy            : 0.01%ą1digit

       Sensitivity           : 50mVrms,10Hz-20MHz

       Max. Input Level : 140Vp-p

       Input Resistance: 1MΩ

9.Power

        Voltage      : AC100，120，220，230ą10℅

    Frequency: 50HZ, 60HZ

10.Power Consumption : <15VA

11.Working environment

        Temperature: +5°C - +40°C

         Humidity : <85℅RH（+40°C)

Pulse Generator

Model : PG1000C

Features and usage