DSO-25216 Series PC Based digital Storage Oscilloscope

Product Information
USB2.0/1.1 & Parallel (EPP Mode) Interface

Model/Item No.:
DSO-25216

Specifications/Features :
  1. Max Sampling Rate 250Mhz,by 1,2,5 sequence.
  2. Record Length 2K/8K/128K.
  3. Analog 2channels/A1,A2.Digital 16channels/ch0~ch15.
  4. Pre-trigger funtion make view record about 33MG 
    point step by step.
  5. External clock up to 80Mhz.
  6. Input Band with DC-80Mhz.
  7. Input Impedance: Analog=> 1Mohm/15pf.Digital =>200Kohm/4pf.
  8. Max. Input voltage 50V(100V Transient), 
  9. Analog sensitivity 5mv/div to 2v/div (Probe 1:1).Digital threshold -1v~+3v.
  10. Analog Trigger Level: Positive or Negative Slope 
    adjustable level (10 Vertical divisions)
  11. Digital Trigger Qulify:0,1,X(don't care) settings for all Digital channels.
  12. Vertical resolution 8bits.
  13. Repetitive up to 20Ghz.


SDO-25216 SOFTWARE DISPLAY

Hardware Specifications
Model DSO-25216 Remark
Sampling Rate 1Sa/s to 250MSa/s by 1, 2, 5 sequence Internal clock
External clock 1 KHz to 80 MHz From Channel D0
Record Length 2K /8K/128K Point
Analog Channel A1, A2  
Input Bandwidth DC- 80MHz (-3db) @BNC connect

Input Impedance

1Mohm // 15pF
Max. input voltage 50v (100v Transient)

Sensitivity

5mv/div to 2v/div

@Probe 1:1

Trigger Level

Positive or Negative Slope adjustable level

10 Vertical Divisions


Digital Channel

D0-D15 (16ch)

Logic Pod

Input Bandwidth

DC- 100MHz

 

Input Impedance 200Kohm//3pF
Max. input voltage 50v (100v Transient)
Threshold Voltage -6.35v to +6.4v by 50mv step
Trigger Qualify 0, 1, X (don't care) settings for all Digital channels  
 

 

 
 

DSO-2902 , 2904 Series

DSO-2902

DSO-2904
State of the art features
  • Two/four 8 bit, 80MHz bandwidth,250MSa/s analog digitizing channels.
  • Eight/sixteen 250MHz logic analyzer channels.
  • Innovative cross triggering: Logic analyzer channels can trigger the analog channels.
  • Deep 256K sample data acquisition buffers on each channel.
  • Continuously variable pre-/post-trigger view.
  • Variable threshold voltage on logic analyzer channels.
  • External clock input.
  • Very fast screen update rates.
  • High impedance probes, logic analyzer pod, clips, wires and software all include-no hidden costs.
  • 64K FFT fast display spectrum from 1.22 to 80MHz, the gain type is logarithm, power spect, magnitude.
  • Free software upgrade.
  • Connect to Laptop or Desktop PC via USB/Parallel port.

The DSO-2XXX DSO/Logic Analyzers/Spectrum include everything you normally pay extra for...Logic Analyzer pod, clips, and wires; Oscilloscope probes; real-time "front panel" software

Cross Triggering for Mixed Signal Analyzer

The DSO-2XXX contain fully synchronized cross triggering. You can capture and display analog events that affect your digital circuits, or vice-versa, and correlate the two to identity cause and effect relationships. The logic analyzer can act as an eight channel pattern trigger input for the DSO. or the oscilloscope can trigger the logic analyzer when an analog signal crosses a threshold. The display screen shows the full256K sample deep data buffers for both the analog waveforms and the digital data patterns. All-channel zoom expansion and cursors identify synchronous events on different channels.

Portability and The PC Advantage

The DSO-2XXX connects via the USB/Parallel port so you run it from a Lap-top or a Desktop PC. The ultra-compact size allows you take it with you -wherever you go. Use of your PC for processing, display, nd data storage saves your time and money. Make measurements in your first half hour due to the easy installation and simple operation. The instrument responds instantly, like an analog oscilloscope, to setting changes. Since the instrument resides in your PC, so does the data-no programming required for data transfers. You can store an unlimited number of waveforms and timing patterns to floop or hard disk for later recall. Named set up panels can also be saved and recalled from disk.


SDO-2902/2904 SOFTWARE DISPLAY

Hardware Specifications

Model

DSO-2902/256K
[250 MHz]

DSO-2904/256K
[250 MHz]

Remark

Sampling Rate

1Sa/s to 250MSa/s by 1, 2, 5 sequence

Internal clock

External clock

Up to 80 MHz

From Channel D0

Record Length

1K/8K/128K/256K

1K/8K/128K/256K

Point

Analog Channel

A1,A2

A1,A2,A3,A4

2Ch / 4Ch

Input Bandwidth

DC- 80MHz

@BNC connect

Input Impedance 1Mohm//15pF

Max. input Voltage

50v (100v Transient)
Sensitivity 10mv/div to 2v/div @Probe 1:1

Trigger Level

Positive or Negative Slope adjustable level

10 Vertical Divisions

Repetitive Mode

Up to 20 GHz

Up to 20 GHz

 


Digital Channel

D0-D7 (8ch)

D0-D15 (16ch)

Logic Pod

Input Bandwidth

DC - 80MHz

 

Input Impedance

200Kohm//4pf

 

Max. input voltage

50v (100v Transient)

 

Threshold Voltage

-1v ~ +3v

by 50mv step

Trigger Qualify

0, 1, X (don't care) settings for all Digital channels

 

Trigger Delay

No Support